Name: Native Instruments Traktor Kontrol Z2
Brand: Native Instruments
Rating: 5 (1 reviews)

To Next Page

To Previous Page

5.2.4 INPUT Section

The INPUT section on the rear panel.

The channel INPUT section is where you'll be connecting your physical Decks (turntables or

CD players) to the Z2.

▪ PHONO Inputs: Connect a turntable (with Timecode or standard vinyl) to the PHONO

channel inputs. For a more detailed description, please read the separate Setup Guide as

instructed in ↑1.3.1, The Setup Guide.

▪ LINE Inputs: The LINE inputs are for connecting CD players (timecode or standard CD)

and other standard audio devices which provide line-level output levels, including most

portable recorder/players (for a more detailed description, please read the separate Setup

Guide as instructed in ↑1.3.1, The Setup Guide).

Note there are two basic modes the Z2 can be operated in: TRAKTOR mode and Direct

mode. In TRAKTOR mode, the Z2's channels will control TRAKTOR's software Decks. In Di-

rect mode the mixer will work stand-alone and the software will be bypassed. To activate

TRAKTOR mode and, hence, enable Timecode control of TRAKTOR Decks, press the

TRAKTOR buttons next to the phono/lines switches on the top panel of the Z2 so that they

are lit. You can also mix these modes and have one channel operating in Direct mode while

the other is running ion TRAKTOR mode. See also ↑3, Using the Z2 as a Stand-alone DJ

Mixer (Direct Mode) and ↑4, Using the Z2 with TRAKTOR (TRAKTOR Mode).

TRAKTOR KONTROL Z2 Hardware Reference

Rear Panel

TRAKTOR KONTROL Z2 - Manual - 35

Other manuals for Native Instruments Traktor Kontrol Z2

Questions and Answers:

Need help?

Do you have a question about the Native Instruments Traktor Kontrol Z2 and is the answer not in the manual?

General

Frequency range	20 - 20000 Hz
Channels quantity	6 channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
AUX in	Yes
XLR out	2
AUX out ports	1
Headphone connectivity	3.5 mm/6.35 mm
Product color	Black
USB connector type	USB Type-A, USB Type-B
AC input voltage	115 - 230 V
Power consumption	750 mA
AC input frequency	50 - 60 Hz
Minimum storage drive space	1024 MB
Mac operating systems supported	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Windows operating systems supported	Windows 10