Of course, you can operate the Z2 without using TRAKTOR's rich feature set. But you will cer-
tainly be rewarded for taking a little time to learn more about the TRAKTOR software so that
you can get the most out of the Z2 as well.
5.2 Rear Panel
The Z2's rear panel.
The rear panel is where you'll connect all the inputs and outputs for your setup and this is, in
many ways, the most important thing to "get right."
5.2.1 AC Power
The power switch and the jack on the rear panel.
▪ Power Switch: Switches the TRAKTOR KONTROL Z2 on/off.
▪ Power Jack: Plug in a standard IEC C14-type connector power cord (included) here.
TRAKTOR KONTROL Z2 Hardware Reference
Rear Panel
TRAKTOR KONTROL Z2 - Manual - 32
To Next Page
Loading...
