5.4.21 Volume Faders And Crossfader
The volume faders and the crossfader.
Channel Volume
The channel volume faders control the volume of the associated channel.
The channel volume faders control Decks A and B — to adjust the volume on Decks C and
D, use the Deck (C and D) volume knobs. See ↑5.4.3, DECK C and DECK D Knobs.
Crossfader
The crossfader lets you mix between two channels. Note that if the channel faders are turned
up in all four Decks, you will be able to crossfade between any two sets of Decks. See the
TRAKTOR manual for more details.
Crossfader reverse: On the front panel of the Z2, the XF REVERSE switch lets you reverse the
crossfader direction. When on, the Level Meter will also display XF REVERSE.
TRAKTOR KONTROL Z2 Hardware Reference
Top Panel
TRAKTOR KONTROL Z2 - Manual - 63
To Next Page
Loading...
