User & Service Manual Natus Quantum Amplifier
11
Table 2 – EMC Standard of Compliance and Normative References
IEC 60601-1-2, Edition 4.0, February 1, 2014
Medical electrical equipment – Part 1-2: General
requirements for basic safety and essential
performance– collateral standard: electromagnetic
compatibility – requirements and tests
IEC 61000-4-2:2008, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-2:
Testing and Measurement Techniques -
Electrostatic Discharge Immunity Test
IEC 61000-4-3 ed 3.0 with A1:2007+A2:2010
Electromagnetic Compatibility (EMC) Part 4-3:
Testing and Measurement Techniques - Radiated,
Radio-frequency, Electromagnetic Field Immunity
Test
IEC 61000-4-4:2012, ed 3.0
Electromagnetic Compatibility (EMC) Part 4-4:
Testing and Measurement Techniques - Electrical
Fast Transient/Burst Immunity Test
IEC 61000-4-5:2014, ed 3.0
Electromagnetic Compatibility (EMC) Part 4-5:
Testing and Measurement Techniques - Surge
Immunity Test
IEC 61000-4-6 ed 2.0 with A1:2004 + A2:2006
Electromagnetic Compatibility (EMC) Part 4-6:
Testing and Measurement Techniques - Immunity
to Conducted Disturbances, Induced by Radio-
frequency Fields
IEC 61000-4-8:2009, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-8:
Testing and Measurement Techniques - Power
Frequency Magnetic Field Immunity Test
IEC 61000-4-11:2004, ed 2.0
Electromagnetic Compatibility (EMC) Part 4-11:
Testing and Measurement Techniques - Voltage
Dips, Short Interruptions and Voltage Variations
Immunity Tests
IEC 61000-3-2:2014, ed 4.0
Electromagnetic Compatibility (EMC) Part 3-2:
Limits - Limits for Harmonic Current Emissions
IEC 61000-3-3:2013, ed 3.0
Electromagnetic Compatibility (EMC) Part 3-3:
Limits - Limitation of Voltage Changes, Voltage
Fluctuations and Flicker in Public Low-voltage
Supply Systems
CISPR 11 ed 5.0 with A1:2010
Industrial, Scientific and Medical (ISM) Radio-
Frequency Equipment - Electromagnetic
Disturbance Characteristics - Limits and Methods
of Measurement
To Next Page
Loading...
Need help?
General
