Indicates that the breakout is recording in Ambulatory Mode. This means that the
breakout is recording data to the internal memory. If the breakout is disconnected
from the base, this icon shows briefly when the breakout is reconnected, but
switches to the stored icon while the study backfills and uploads the data to the
NeuroWorks/SleepWorks software.
Indicates that there is stored data on the internal SD card. This icon shows when
the Natus base unit is backfilling the data from the internal SD card to the
NeuroWorks/SleepWorks software. Once the backfill is finished the icon
disappears.
To Next Page
Loading...
