User & Service Manual Natus Quantum Amplifier
67
4. Adjust the required settings for acquisition.
5. Click on the New Profile button . This automatically generates a new profile name based on
the current selected profile, appending a numeric sequence to ensure that the named profile is
unique. If the drop-down list is empty, the profile name Default will appear.
NOTE: As a best practice, ensure to rename profiles so that they have meaningful
names. These should not include the numeric sequence that is generated
automatically each time the profile list is loaded.
Use only alpha-numeric characters, underscores, and dashes.
Do not use other characters including but not limited to:~!@#$%^&*()+{}[]"'<>/,.
NOTE: If an attribute or setting on the current, named profile is changed, an asterisk
is placed to the left of the profile name next to the drop-down list.
Named Profile – Change to profile made
To undo these changes to the profile, select the current profile name again or select
another saved profile from the drop-down list. The changes will be reverted to the
saved copy. Alternately, clicking Cancel on the Edit Settings dialog will prevent
these changes from being saved.
6. Once the profile has been configured, click the Apply button or OK to save the changes.
For additional details on profile setup and information, refer to the Acquisition Profiles section of the
NeuroWorks User Manual.
To Next Page
Loading...
