www.naxa.com Page 19
Do not use the adapter with any other
power source.
Using the DC Car Adapter
Use the included DC car adapter to connect the unit to
DC power socket found on cars, campers, boats, and
more.
• Connect the large end of the DC car adapter to a
standard DC car power socket.
• Connect the barrel plug end of the adapter to the
Power socket [15] of the unit.
Basic Functions
Turning the Unit On and O
To turn the unit on, press POWER [9]. The power indica-
tor [12] will light blue.
To turn place the unit in Standby mode, press POWER
[9]. The power indicator [14] will turn red.
⚠L
To turn the unit off completely, disconnect
the power plug. The power indicator [12]
will turn turn off.
The TV will automatically switch to Standby
mode after 10 minutes if no signal is de-
tected.
⚠⚠
After placing the TV in Standby mode, wait
5 seconds before turning the TV on again.
To Next Page
Loading...
