www.naxa.com Page 39
Switching to the USB or SD/MMC/
MS Player
While the unit is in DVD source mode, press the MEDIA
key on the remote to change between DVD, USB, and
SD/MMC/MS player modes.
• The USB port [27] and SD/MMC/MS card slot [28] is
on the side of the TV.
• The USB port and SD/MMC/MS card slot can play:
• Video (MPEG-1, MPEG-2)
• Audio (MP3, WMA)
• Photos (JPEG)
DVD System Menu
While the input source mode is set to DVD, press SET-
UP/EXIT on the remote control to access the DVD sys-
tem menu.
• Press the UP/DOWN keys to select an option.
• Press the RIGHT key to advance the selection.
• Press ENTER to conrm a selection.
• Press the LEFT key to return to the previous level.
• Press SETUP/EXIT when nished.
To Next Page
Loading...
