Getting Started with MAXserver Access Servers
0038
106
The Exit Without Saving Configuration Changes option on the Configuration
menu lets you exit without saving the configuration changes that you have
made (i.e., use the configuration that was last saved).
1. To select this option, type X at the "Enter menu selection" prompt. If you
have made changes, the configuration menu prompts:
Exit without saving changes (Y/N) [N]?
2. To exit the Configuration menu, type Y and press RETURN. If youdo not
want to exit from the menu, type N and press RETURN to redisplay the
Configuration menu.
If you have not made any changes, the configuration menu displays:
NO CHANGES MADE. EXIT CONFIGURATION MENU (Y,N) [Y]?
To Next Page
Loading...