Getting Started with MAXserver Access Servers
0038
142
SIMMs Installation
This section explain how to install and remove MAXserver Single Inline
Memory Modules (SIMMs).
ATTENTION
Only qualified personnel should install or remove MAXserver SIMMs.
Unplug the MAXserver before you begin the installation. There is
danger of Electrical Shock if you fail to do so.
SIMMs are extremely sensitive to static electricity. Static from your
clothes or work environment can destroy SIMMs, or diminish their
reliability.
Handle SIMMs by their edges only, and use standard static-
preventive procedures. Preferably, the installation should be done
with an anti-static wrist band, on a grounded work surface.
Recommended SIMMs Manufacturers
The MAXserver accepts 30-pin 70 ns. (or faster) 1M x 8 SIMMs with tin
contacts. (Do not use SIMMs with gold contacts.). The order code for a 2MB
SIMM memory upgrade kit is MX-500-5744. Contact your NBase-Xyplex
sales representative to order this kit.
Problem: Determining what type of SIMMs can be used to upgrade a 1600,
1620 or 1640.
To Next Page
Loading...