Need help?Do you have a question about the NBase-Xyplex MAXserver 1608A and is the answer not in the manual?
General| Brand | NBase-Xyplex |
|---|---|
| Model | MAXserver 1608A |
| Category | Server |
| Language | English |
Explains how MAXservers load software from flash cards or network load servers.
Introduces FocalPoint and ControlPoint utilities for MAXserver configuration.
Step-by-step guide for unpacking and verifying the MAXserver unit.
Instructions on selecting a suitable location and mounting the MAXserver.
Instructions for connecting the Ethernet cable to the MAXserver.
Steps for connecting the MAXserver to a power source.
Explains the function of LEDs on the MAXserver 1620/1640 and 1604/1608B.
Steps to reset the MAXserver to its default state.
How to gain privileged access to the MAXserver command line.
How to enable and set the login password for server ports.
Details on setting the privilege password for administrative access.
Configuring ports for enhanced security and limited command access.
Instructions on loading software images from flash cards.
Steps to initiate and terminate flash card load image updates.
Important factors for wiring RJ-45 connectors for MAXserver ports.
Information about adapters for connecting RJ-45 to DB-25 connectors.
Details on octopus cables for connecting multiple serial ports.
Step-by-step guide to access the MAXserver configuration menu.
View status and settings of the MAXserver's initialization records.
Options to change unit settings like software loading and memory.
Setting up IP addresses for internet access, load hosts, and gateways.
Commands to enable or disable protocols for loading and parameter transfer.
Commands to enable or disable dump protocols for sending information.
How to access the console port from an Ethernet-attached station.
Accessing the console port using a dumb terminal connected to a serial port.
Guidance on troubleshooting issues during MAXserver startup and loading.
Interpreting front panel light patterns as error codes.
Lists common error codes, their problems, and solutions.
Steps to take if the LAN light on the MAXserver is not illuminated.
Lists compatible SIMM types and manufacturers for MAXserver memory upgrades.
Step-by-step guide for installing SIMM modules into the MAXserver.
Procedures for removing SIMM modules from the MAXserver.
Specifies maximum cable lengths for different serial speeds and models.
Indicates the number of serial ports available on each MAXserver model.
Lists the minimum software versions required for MAXserver models.
To Next Page