Getting Started with MAXserver Access Servers
0038
53
Copying Flash Cards
Use this command on units that have flash cards. You can copy the entire
contents of one card to another with this command.
XYPLES>> SET SERVER CARDCOPY
Deleting Flash Cards
Use this command on units that have flash cards. You can delete the entire
contents of a flash card.
XYPLEX>> SET SERVER CARDCOPY ERASE
CAUTION
DO NOT USE THIS COMMAND UNLESS YOU ARE ABSOLUTLEY
SURE THAT YOU WANT ALL CONTENTS DELETED.
Displaying the Flash Card Settings
Use this command to display the card’s current settings.
XYPLEX>> SHOW CARD STATUS
To Next Page
Loading...