Getting Started with MAXserver Access Servers
0038
151
Welcome to the Configuration Menu.
Access server Configuration Menu
1. Display unit configuration
2. Modify unit configuration
3. Initialize server and port parameters
4. Revert to stored configuration
S. Exit saving configuration changes
X. Exit without saving configuration changes
Enter menu selection [X]:
Figure 40 - MAXserver Access server Configuration Menu
5. Type '1' and press <RETURN>. The unit displays a menu similar to
Figure 41.
Display Unit Configuration Menu
1. Initialization record #1 (Enabled)
2. Initialization record #2 (Disabled)
3. Initialization record #3 (Disabled)
M. Miscellaneous unit configuration
D. Set unit configuration to defaults.
X. Exit to main menu
Enter menu selection [X]:
Figure 41 - Sample Display Unit Configuration Display
To Next Page
Loading...