Getting Started with MAXserver Access Servers
0038
31
Table 1 - Factory Default Settings
Configuration Factory Default Setting
Initialization Record 1
Initialization Record 2
Initialization Record 3
Enabled
Disabled
Disabled
Parameter file load method NVS, XMOP, MOP, BOOTP, RARP
Software Image load method* CARD, XMOP, MOP, BOOTP, RARP,
DTFTP*
Dump File Method XMOP, MOP, BOOTP, RARP
Software filename for
CARD/XMOP/MOP loading
XPCSRV20
Default unit IP address: 0.0.0.0
Installed memory 4 MB
Loading Status messages Enabled
Directed TFTP values 0.0.0.0 or N/A
Server login password (#) ACCESS
Privileged password SYSTEM
* DTFTP is not enabled at the factory.
Autobauding Feature
MAXserver serial ports are configured to adjust automatically to the
communication speed of a connected terminal.
To Next Page
Loading...