Getting Started with MAXserver Access Servers
0038
141
If the LAN Light Is Out
Correct Operation: When the LAN light on the MAXserver front panel is
ON, the server is communicating with the network.
Solution: If you are unable to communicate with the network and the LAN
light is not ON, check the following.
·
Make sure that the Ethernet transceiver cable or 10BASE-T network
cable is securely connected to the back of the MAXserver.
·
There may be a problem with the network itself. Check whether any
other devices connected to the network are experiencing communications
problems.
·
Check whether a diagnostic code is being displayed on the front panel
lights (indicating a hardware or software error).
If none of these checks indicate a problem and the LAN light is still not ON,
contact your NBase-Xyplex Customer Support representative for assistance.
(In the U.S., call NBase-Xyplex Customer Support at 1-800-435-7997. For
International calls, the number is 987-952-4888).
To Next Page
Loading...