Getting Started with MAXserver Access Servers
0038
127
5. Enter the following command:
TELNET 192.168.5.1:
<
logical-port-number
>
In the above command, logical-port-number is the logical port number of
the out-of-band management console port. To determine the logical port
number, multiple the physical port number by 100 and add 2,000. For
example, the logical port number for physical port number 1 is 2100.
This command sequence will then connect you to the console of the out-of-
band device that's connected to the destination port.
To Next Page
Loading...