Getting Started with MAXserver Access Servers
0038
136
"MOM$LOADmight not be defined properly. (Refer to the Software
Installation Guide for VMS load hosts for more information.)
File Loading Errors
PROBLEM: ERROR: SERVER XX-XX-XX-XX-XX-XX; FILE ERROR:
NOT A LOAD FILE.
This message type appears if the load server attempted to load a file image
that is incompatible with the MAXserver. (The load file did not have a
MAXserver ASCII identification string header.) This can happen if, for
example, the file is a DECserver 200 load file.
Normal Process: After the MAXserver loads a file, it checks the contents
of the file for proper identification and size.
Error: Server xx-xx-xx-xx-xx-xx; File error: corrupted data.
Problem: The load server attempted to load a file that is compatible with
the MAXserver, but the file has been corrupted.
Solution: Correct this problem by installing a new file in the load server.
Refer to the Software Installation Guide for instructions.
Error: Error Server xx-xx-xx-xx-xx-xx; File error: not executable.
Problem: No 680xx CPU identifier appears in the file header. This is a
NBase-Xyplex file, but it cannot be executed by the server.
Solution: Resolve this problem by installing the proper file in the load
server. See the Software Installation Guide for instructions.
Error: Server xx-xx-xx-xx-xx-xx; Timed out, will retry.
To Next Page
Loading...