NBase-Xyplex MAXserver 1608A - Page 47

Getting Started with MAXserver Access Servers
0038
47
The default values are, "
Enter username>
" and "
Enter user
password>
."
If the server booted from an existing parameter file, the username prompt is,
"
Enter username>
."
For the password prompt, the default value is "
Enter user password>
."
However, if SecurID is enabled on the port, the default password prompt is
"
Enter PASSCODE:
."
Use the SHOW PORT ALTERNATE CHARACTERISTICS command to
display the current prompt settings.
Xyplex>> SHOW PORT ALTERNATE CHARACTERISTICS
Port 4: aa 17 Nov 1998 18:50:08
Resolve Service: Any_Lat DTR wait: Disabled
Idle Timeout: 0 Typeahead Size: 128
SLIP Address: 0.0.0.0 SLIP Mask: 255.255.255.255
Remote SLIP Addr: 140.179.245.148 Default Session Mode: Interactive
TCP Window Size: 256 Prompt: MX1620
DCD Timeout: 2000 Dialback Timeout: 20
Stop Bits: 1 Script Login: Disabled
TCP Keepalive Timer: 0 Username Filtering: None
Nested Menu: Disabled Nested Menu Top Level: 0
Command Size: 80 Clear Security Entries: Disabled
Rlogin Transparent Mode: Disabled Login Duration: 0
Xon Send Timer: 0 TCP Outbound Address: 0.0.0.0
Slip Autosend: Disabled Radius Accounting: Disabled
APD Prompt: Enabled
Username Prompt: Enter username>
Password Prompt: Enter user password>