NEC Dterm I Series - ORIGINATE CALLS; Outside Call via Line Key; Internal Call Procedure; Dynamic Dial Pad Calling

- 16-
TO ORIGINATE AN OUTSIDE CALL VIA EXTENSION LINE KEY
• Lift handset or press Speaker key, receive dial tone.
• Dial the Central Office access code, e.g. 9.
• Dial desired telephone number.
• Use handset or MIC to converse.
TO ORIGINATE AN INTERNAL CALL
• Lift handset or press Speaker key.
• Receive dial tone.
• Dial desired station number.
• Use handset or MIC to converse.
TO ORIGINATE A CALL VIA DYNAMIC DIAL PAD
• While phone is idle, Dial desired station number.
-- OR –
• While phone is idle, Dial desired trunk access code, e.g. 9
• Dial desired telephone number.
• Use handset or MIC to converse.
NOTE: Access to feature is based on data assignment.