NEC Dterm I Series - CALL FORWARDING-BUSY; Setting, Verifying, and Canceling Busy Calls Forwarding

- 40-
CALL FORWARDING-BUSY
To set:
• Press Speaker key. Receive dial tone.
• Press FD-B key or dial Call Forward Busy
access code. Receive special dial tone.
• Dial destination station or external telephone number. Receive service set
tone.
• FD-B LED lights (at your station or at the Dterm of the sub line station you
are setting).
• Press Speaker key. Call Forward Busy is set.
To verify (with Display Phone):
• Press Speaker key. Receive dial tone.
• Press FD-B or dial Call Forward Busy access
code.
• Display indicates the station number calls are forwarded to.
To cancel:
• Press Speaker key. Receive dial tone.
• Press FD-B key plus * or dial Call Forward Busy
cancel code. Receive service set tone. LED goes
out at your station.
• Press Speaker key. Call Forwarding is canceled.