NEC Dterm I Series - CONFERENCE CALLS; Establishing Three-Way Conferences

- 29-
CONFERENCE
Option 1
• With call in progress, ask party to hold.
• Press Transfer key, receive interrupted dial tone.
• Dial desired number.
• After call is answered, press Conf key. Conf LED lights.
• Three-way conference is established.
• If one party hangs up, other two remain connected. Conf LED goes out.
Option 2
• With call in progress and third party on hold on another Line/Trunk key.
• Press Conf key, Conf LED flashes.
• Press Held Line/Trunk key, Conf LED lights.
• Three-way conference is established.
NOTE: Access to Option 2 is based on software revision and data
assignment.