- 28-
TO PLACE A CALL ON REMOTE HOLD
To initiate:
• While in conversation with Station/Trunk Party
• Press the TRANSFER key. Receive interrupted dial tone
• Dial destination station's extension.
• Receive ring back tone.
• Press the Hold key. (Call is placed on hold at the destinations station’s
extension)
• Hang up.
To retrieve at destination:
• Lift handset or press Speaker key.
• Press line on hold. Use handset to converse.
NOTE: Any station with the destination line appearance can retrieve the
call.
To retrieve from phone without destination line appearance:
• Lift handset or press Speaker key
• Dial Access Code for Direct Call Pick-Up
• Dial destination station’s extension
• Use handset to converse
To Next Page
Loading...
