NEC Dterm I Series User Manual

- 15-
DTERM IP LOGIN OPERATION
Option 1 Automatic Login Mode (Authentication by MAC Address)
• During start up the LCD displays the login screen.
• Enter the Station Number at the “LOGIN:” prompt.
• Press the Set key (Soft Key).
• Press the OK key (Soft Key). The time and date
appear on the LCD.
NOTE:
After the first registration, Login operation is not required.
Option 2 Protected Login Mode
•
During start up the LCD displays the login screen.
• Enter the Station Number at the “LOGIN:” prompt.
• Press the Set Key (Soft Key).
• Enter the Password at the “PASSWD:” prompt.
• Press the OK Key (Soft Key). The time and date appear on the LCD.
•
DTERM IP LOGOUT OPERATION
• Go off-hook or press the Speaker Key. Receive Dial Tone.
• Dial the Logout Feature Access Code or press the Logout Key or Logout
Soft Key. Receive Service Set Tone.
• The LCD displays the login screen.

NEC Dterm I Series Specifications

General

Type	Digital telephone
Headset Jack	Yes
Weight	2.2 lbs
Power Supply	System powered
Dimensions	Varies by model