- 18-
TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS
NOTE: With DTP-32D
• Press desired One-Touch key, or press Speaker key and One-Touch key.
• To program:
NOTE: Available only on Dterm stations with speed calling keys.
• Press Conf key. Conf key flashes
• Press desired One-Touch key, Speaker button LED
lights steady.
• Enter desired station number, feature code or outside access code and
telephone number. Display indicates digits dialed.
• Press Conf key again to save the number.
• To verify:
• Press Conf key.
• Press desired One Touch key.
• Display indicates digits programmed.
NOTE: Station numbers programmed to one touch buttons will light when
that station is in use. (This is only available on a 32D Terminals).
To Next Page
Loading...
Need help?
General
