NEC Dterm I Series - SYSTEM CLOCK AND DAY;NIGHT MODE SETUP; System Clock Setup; Day;Night Mode Change

- 53-
SYSTEM CLOCK SETUP BY STATION DIALING
• Press Speaker key or lift handset, Receive dial tone.
• Press System Clock Setup Key or feature access code.
• Dial new time in 24 hr format using 6 digits (HHMMSS).
• Receive service set tone, replace handset or press Speaker key.
NOTE: Access to feature is based on data assignment.
DAY/NIGHT MODE CHANGE BY STATION DIALING
• Press Speaker key or lift handset, Receive dial tone.
• Press Day/Night Mode Key or feature access code.
• Dial 1 for Day/2 for Night/3 for Mode-A or 4 for Mode-B.
• Replace handset or press Speaker key.
NOTE: Access to feature is based on data assignment. If a key is used
lamp indication will be:
Night Mode =Red lamp on
Mode-A =Red lamp flashing (60 ipm)
Mode-B =Red lamp flashing (120 ipm)