NEC Dterm I Series - BROKER CALLS AND CALL BACK; Establishing Broker Calls; Setting Station Call Back

- 30-
TO ESTABLISH A BROKER CALL
• While engaged in a call and wishing to consult a third party,
press Transfer. Caller is automatically placed on hold.
• Dial desired party to consult.
• Press Transfer to return to original caller. Third party is
automatically placed on hold.
• Repeated depression of the Transfer button allows you to alternate
between calls.
NOTE: The display indicates connected station or trunk at
any given time.
CALL BACK (STATION)
• Lift handset or press Speaker.
• Dial desired station number and receive busy tone or ring back tone.
• Press Call Back or dial 2 and receive service set tone.
• Restore handset.
• When busy station becomes idle or the station that did not answer initiates
or answers a call or accesses a feature and then becomes idle, the setting
station is alerted by ring and flashing LED.