User Guide
102
www.nec-computers.com
Scan Devices
When you click [Scan Devices] on WebBIOS Top Menu, the HDDs connected are
detected again. Use this feature when you have installed a new HDD while WebBIOS
is running.
Caution
■ If the newly connected HDD contains another configuration
information, the [Foreign Configuration] screen shown below
appears. To use the HDD as new one, click [Clear] to clear
the configuration information in HDD.
Figure 44: Foreign Configuration Screen
■ If you use the Universal RAID Utility to configure a RAID sys-
tem using the newly connected HDD containing another
configuration information, first clear any other configuration
information using this Scan Devices feature.
To Next Page
Loading...