User Guide
141
www.nec-computers.com
Drive Cover
Open the drive cover when installing/removing a fan assembly, processor, and backup
file device or reconnecting an internal cable.
Removal
1. See the section “Preparing Your System for Upgrade” on page 137 to prepare.
2. Pull out the server from the rack.
3. Slide the drive cover toward the front of the server while pressing the lock
button on the cover.
4. Lift off the drive cover from the server.
Figure 87: Removing the Drive Cover
Installation
When installing the drive cover, check that the tab of the cover is securely inserted into
the slot in the server frame.
Slide the drive cover toward the rear of the server. The drive cover is locked when a
distinct "click" is heard. At this time, check the release button for normal state.
Figure 88: Replacing the Drive Cover
To Next Page
Loading...