User Guide
306
www.nec-computers.com
Installing and Setting the Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
Notes: All the operations related to Intel® PROSet is must
be executed with administrator privileges. Operation via a
[Remote Desktop Connection] is prohibited.
To close the adapter teaming properties window without making
any changes, click the Cancel button.
Clicking the [OK] button will cause a temporary loss of network
connectivity.
Using PROSet enables the following items:
■ Detailed information of the adapter confirmation.
■ Loop back test, packet transmission test diagnosis and so on.
■ Teaming setup.
Configuring several network adapters as one team provides the server with a tolerant
environment and enhances throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet.
1. Insert the NEC ExpressBuilder DVD into the optical disc drive.
2. The [Windows Explorer] dialog starts.
■ Procedure using a standard start menu
Click Start menu and click [Windows Explorer].
■ Procedure using a classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows
Explorer].
3. Run "dxsetup.exe" in the following directory.
\001\win\winnt\dotnet\dl3\proset\win32
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Click [Next].
7. Select [I accept the terms in the license agreement] and click [Next].
8. Click [Install].
When [InstallShield Wizard Completed] window is displayed, click [Finished].
To Next Page
Loading...