User Guide
95
www.nec-computers.com
Note that the slot numbers shown in Physical Drives box of WebBIOS start from 0,
whereas those in the Universal RAID Utility start from 1.
Figure 36: Physical Drives View of WebBIOS
Figure 37: Physical Device Properties in the Universal RAID Utility
Using WebBIOS
Starting WebBIOS
1. Power on the server and press Esc when a full-screen logo is displayed.
2. Press Ctrl + H on the POST screen to start WebBIOS.
LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) xxxx LSI Corporation
HA -X (Bus X Dev X) MegaRAID SAS PCI 8708EM2
FW package: X.X.X-XXXX
X Logical Drive(s) found on the host adapter.
X Logical Drive(s) handled by BIOS
Press <Ctrl> <H> for WebBIOS
To Next Page
Loading...