EasyManua.ls Logo

NEC Express5800 120Rj-2 - Appendix 1: Specifications

NEC Express5800 120Rj-2
367 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide
256
www.nec-computers.com
Appendix 1: Specifications
Table 34: Specifications
Item NEC Express5800 120Rj-2
CPU Type
Quad-core Intel
®
Xeon processor
Standard 1
Maximum 2
Chipset Intel 5000P (1333 MHz)
Memory Minimum 2 GB (1 GB x 2)
Maximum 48 GB (4 GBx12, the standard DIMM must be replaced.)
Memory module DDR2-667 FB-DIMM with x4/x8 SDDC feature
Error check ECC
Graphics (VRAM) 8 MB, integrated on mootherboard
1064x768, 1280x1024
16 million colors max.
Auxiliary
storage
device
Floppy disk (option) 3.5-inch drive x 1 (USB)
Hard disk (standard) None
Hard disk (maximum) SATA: 4.5 TB (750 GB x 6)
SAS: 1.8 TB (300 GB x 6)
Hot-swap hard disk
drive
Supported
Optical Device Drive CD-RW/DVD-ROM Drive
(DVD: x3 to x8 speed, CD: x10 to x24 speed)
Internal backup device One IDE, SCSI, USB device of 3.5-inch (9 cm) width and 1.6-inch (4cm)
height can be installed.
A separate interface cable is required.
Additional
bay
Hard disk bay 6 slots
3.5-inch floppy disk
drive
1 slot
3.5-inch device bay 1 slot
Additional
slot
Full height PCI EXPRESS (x8) x 1 slot
PCI-X (64-bit/100 MHz) x 2 slots
When the optional PCI-X riser card is installed:
- 64-bit PCI-X (133MHz): 1 slot,
- 64-bit PCI-X (100MHz): 2 slots
When the optional PCI-EXPRESS riser card is installed:
- PCI-EXPRESS (x8): 1 slot,
- PCI-EXPRESS (x4): 2 slots
Low Profile PCI EXPRESS (x8) x 1 slot
PCI EXPRESS (x4) x 2 slots
Contains the factory-installed RAID controller.
LAN interface 1000Base-T/100Base-TX/10Base-T (2 ports)
100Base-TX/10Base-T management port (1 port)

Table of Contents