User Guide
81
www.nec-computers.com
Boot Menu
1. When the BIOS detects a bootable device, it displays the information on the
device in the relevant description.
To boot the server from a desired device, the device must be registered as a
boot device. (Up to eight boot devices can be registered.)
2. Pressing X after selecting a device allows the selected device to be registered
as a boot device or deleted from the registration.
When eight boot devices are registered, no other device can be registered as a
boot device, even if you press
X. To register another device as aboot device,
you first need to delete the reigstration from a device which is not anymore
used to boot.
Pressing
Shift + 1 after selecting a device enables/disables the selected device.
3. You can change the boot priority (first to eighth) of each device by using the up
and down arrow keys, and + and/or –.
To change the priority of a device, move the cursor to the device by using the
up and down arrow keys, and press + or –.
Table 20: Boot Menu
Feature Description
USB CDROM USB CD-ROM drive
IDE CD ATAPI CD-ROM (including DVD-ROM drive)
USB FDC USB floppy disk drive
USB KEY USB flash memory device
IDE HDD IDE hard disk drives
PCI SCSI Internal hard disk drives installed in your system (“Software RAID” is dis-
played in the RAID configuration.)
PCI BEV IBA GE Slot xxxx
Onboard LAN.
LAN1: Slot 0C00, LAN2: Slot 0C01
Other indication
Optional PCI board connected to the riser module.
To Next Page
Loading...