User Guide
347
www.nec-computers.com
9. When prompted to do so, press Enter to start "Welcome to Setup".
10. Once the installation of Windows Server 2003 x64 Edition is completed, the
system reboots automatically.
11. Log on to the system, the [Windows Setup] screen is displayed.
Figure 200: Windows Setup Screen
Caution
■ In some cases, the [Windows Setup] screen may not be dis-
played.
Be sure to install Microsoft Windows Server 2003 R2 x64
Edition DISC 2 according to the following procedures.
■ You can install Microsoft Windows Server 2003 R2 x64 Edi-
tion DISC 2 after the application of "System update".
Be sure to install Microsoft Windows Server 2003 R2 x64
Edition DISC 2. In this case, note that the [Windows Setup]
screen is not displayed.
12. Insert Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into
the optical disc drive.
Confirm the parameters and click [OK].
13. When the installation has completed, remove Microsoft Windows Server 2003
R2 x64 Edition DISC 2 CD-ROM from the optical disc drive, and restart the
system.
Once the installation is completed, be sure to execute the tasks described in
“Driver Installation and Device Settings” on page 352 and “Updating
System” on page 341 of this chapter.
Procedure for License Authentication
The Product Key used in the procedure for license authentication must match with the
COA label.
Notes:
■ Execute the activation within 30 days. The system may be
locked once 30 days have passed.
To Next Page
Loading...