User Guide
154
www.nec-computers.com
Installing or Removing Random Access Memory
Install the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the
motherboard in the server. The motherboard is provided with twelve DIMM board
slots.
Note: Up to 48 GB of memory (4 GB DIMM x 12) can be
installed.
Caution
■ The DIMM is extremely sensitive to static electricity. Make
sure to touch the metal frame of the server to discharge
static electricity from your body before handling the DIMM.
Do not touch the DIMM terminals or on-board parts by a
bare hand or place the DIMM directly on the desk. For static
notes, see “Static Precautions” on page 135
.
■ Make sure to use the DIMM authorized by NEC. Installing a
third-party DIMM may cause a failure of the DIMM as well as
the server. Repair of the server due to failures or damage
resulted from installing such a board will be charged.
■ When four or more sets of 8GB additional memory boards
are installed, the additional PCI slot can contain only one
option card and the factory-installed RAID card.
To Next Page
Loading...