NEC Express5800 120Rj-2 - Advanced Menu

User Guide
69
www.nec-computers.com
Advanced Menu
Memory Configuration Submenu
Table 6: Advanced Menu
Feature Choices or
Display Only
Description Your Setting
Memory
Configuration
Select submenu
PCI Configuration Select submenu
Peripheral
Configuration
Select submenu
Advanced Chipset
Control
Select submenu
Boot-time
Diagnostic Screen
Disabled
Enabled
Enables or disables the display
of the diagnostic screen during
boot. If disabled, the NEC logo
is displayed.
Reset Configuration
Data
No
Yes
Select Yes if you want to clear
the Extended System
Configuration Data (ESCD)
area.
NumLock On
Off
Selects power on state for
NumLock.
Memory/Processor
Error
Boot
Halt
If Boot is selected, the system
will attempt to boot after a
memory or processor error.
Table 7: Memory Configuration Submenu
Feature Choices or
Display Only
Description Your Setting
System Memory Display only e.g. 640 KB
Extended Memory Display only e.g. 784896 KB
DIMM Group #1
Status
Display only
Indicates the current memory
status. "Normal" indicates the
normal status, "Disabled" indi-
cates a memory error, and "Not
installed" indicates no DIMM
installed (display only).
Group #1 indicates DIMMs in
DIMM sockets #11 and #21.
Group #2 indicates DIMMs in
DIMM sockets #31 and #41.
Group #3 indicates DIMMs in
DIMM sockets #12 and #22.
Group #4 indicates DIMMs in
DIMM sockets #32 and #42.
Group #5 indicates DIMMs in
DIMM sockets #13 and #23.
Group #6 indicates DIMMs in
DIMM sockets #33 and #43.
(Memory is interleaved and
DIMMs are used per pair.)
DIMM Group #2
Status
Display only
DIMM Group #3
Status
Display only
DIMM Group #4
Status
Display only
DIMM Group #5
Status
Display only
DIMM Group #6
Status
Display only