NEC Express5800 120Rj-2 - Page 70

User Guide
70
www.nec-computers.com
PCI Configuration Submenu
PCI Device, Onboard Video Controller Submenu
Memory Retest No
Yes
Clears the memory error status
Extended RAM Step 1MB
1KB
Every location
Disabled
Test the extended memory
once per MB, per KB, every
memory location or no test.
Memory RAS
Feature
Interleave
Mirror
Disables or enables the
memory mirroring feature.
Sparing Disabled
Enabled
Disables or enables the online
spare memory feature.
Table 8: PCI Configuration Submenu
Feature Choices or
Display Only
Description Your Setting
Onboard Video
Controller
Select submenu
Onboard LAN Select submenu
PCI Slot 1B Option
ROM
Disabled
Enabled
Used to enable or disable an
option ROM on a PCI board
connected to the full-height
riser card.
PCI Slot 1C Option
ROM
Disabled
Enabled
Used to enable or disable an
option ROM on a PCI board
connected to the low-profile
riser card.
Table 9: PCI Device, Onboard Video Controller Submenu
Feature Choices or
Display Only
Description Your Setting
VGA Controller Disabled
Enabled
Enables or disables the
onboard VGA controller.
Onboard VGA
Option ROM Scan
Auto
Force
Allows selecting the onboard
VGA controller or optional PCI
VGA controller as the display
device that will be active when
the system boots.
The “Force” option is selected
to use the onboard VGA
controller if the optional PCI
VGA controller is installed in the
system.
Table 7: Memory Configuration Submenu (Continued)
Feature Choices or
Display Only
Description Your Setting