User Guide
30
www.nec-computers.com
Standard Features
High performance
■ Quad-core Intel
®
Xeon
®
Processor
■ High-speed memory access (DDR2-
667)
■ High-speed network interface
(1000 Mbps/100 Mbps/10 Mbps
supported)
■ High-speed disk access: SATAII 300
or Serial Attached SCSI (SAS).
Expandability
■ PCI Express (x8): 1 slot (low profile)
PCI Express (x4): 2 slots (low profile,
connector x8) (the factory-installed
RAID controller occupies the slot.)
PCI Express (x8): 1 slot (full height)
■ Large memory up to 48GB.
■ Up to two multi-processors are
available for upgrade.
■ Three network ports (one for
management LAN)
■ USB2.0 interface
Management utilities
■ NEC ESMPRO
■ NEC DianaScope
■ RAID System Management Utility
■ Power monitoring feature
■ Hard disk drive monitoring feature
Maintenance Features
■ Off-line Maintenance Utility
■ Memory dump feature using the
DUMP switch
High reliability
■ Memory monitoring feature (error
correction/error detection)
■ CPU/memory degradation feature
(logical isolation of a failed device)
■ Memory x4/x8 SDDC feature
■ Memory mirroring/online spare
memory feature
■ Bus parity error detection
■ Temperature detection
■ Error notification
■ Internal fan monitoring feature
■ Internal voltage monitoring feature
■ Redundant power supply (hot-swap)
■ Internal RAID Controller
■ Auto-rebuild feature (hot-swappable)
■ BIOS password feature
■ Mechanical security lock
■ Redundant fans
Many available features
■ Redundant power supply (with
optional power supply unit installed)
■ El Torito Bootable CD-ROM (no
emulation mode) format support
■ POWER switch mask
■ Software power-off
■ Remote power-on feature
■ AC-Link feature
■ Remote Console feature
Self-diagnosis
■ Power On Self-Test (POST)
■ Test and Diagnosis (T&D)
Setup
■ NEC ExpressBuilder (system setup
utility)
■ Parameter File Creator
■ SETUP (BIOS setup utility)
To Next Page
Loading...