User Guide
150
www.nec-computers.com
18. Put the heat sink on CPU and fix the heat sink with four screws.
Figure 101: Securing the Heatsink
Note: Take care of the direction of the heat sink (see figure
below)..
19. Make sure that the heat sink is level.
Notes:
■ If the heat sink is not level, remove it, and then install it
again. The following probably causes the heat sink not to be
level:
- –The CPU is not positioned correctly.
- –All screws are not completely tightened.
■ Do not move the secured heat sink.
1
2
3
4
To Next Page
Loading...