User Guide
183
www.nec-computers.com
5. Grasp the handle and firmly push the power supply.
The power supply unit is locked when a distinct "click" is heard.
Figure 137: Locking the Power Supply Unit
6. Connect two power cords.
Use the power cords provided with the system. The AC power lamps flash
when the power cords are connected.
Figure 138: Connecting the Power Cords
7. Power on the server.
The AC power lamps light on.
8. Check, by the Status lamp or on the POST screen, that there are no errors
related to the power supply units.
See
“POST Error Messages” on page 200 for details on the error messages.
If the AC power lamps are off, reinstall the power supply units. If the same
error message still appears, contact your sales representative.
A
Power supply unit 1 (standard)
B
Power supply unit 2 (option)
C
Power cord for power supply unit 1
D
Power cord for power supply unit 2
E
AC power lamps
BA
C
DE
To Next Page
Loading...