NEC Express5800 120Rj-2 - Page 221

User Guide
221
www.nec-computers.com
Power Unit 2 Alm Power unit #2 Failure occurred.
Proc missing Processor was not found.
Proc 1 T-Trip Thermal Trip occurred on processor #1 or #2. the system is forcibly turned
off.
Proc 2 T-Trip
Proc 1 Therm % XX Processor #1 or #2 thermal error occurred.
Proc2 Therm % XX XX=09: high temperature (fetal)
XX=07: high temperature (warning)
XX=02: low temperature (warning)
XX=00: low temperature (fetal)
Proc1 VccpAlm XX Voltage alarm occurred on processor #1 and #2.
XX=09: high temperature (fetal)
XX=07: high temperature (warning)
XX=02: low temperature (warning)
XX=00: low temperature (fetal)
Proc2 VccpAlm XX
Processor 1 IERR IERR occurred on processor #1 or #2.
Processor 2 IERR
SMI timeout SMI timeout occurred.
Sys Fan 1 Alarm FAN#1 alarm occurred.
Sys Fan 2 Alarm FAN#2 alarm occurred.
Sys Fan 3 Alarm FAN#3 alarm occurred.
Sys Fan 4 Alarm FAN#4 alarm occurred.
Sys Fan 5 Alarm FAN#5 alarm occurred.
Sys Fan 6 Alarm FAN#6 alarm occurred.
Sys Fan 7 Alarm FAN#7 alarm occurred.
Sys Fan 8 Alarm FAN#8 alarm occurred.
Sys Fan 9 Alarm FAN#9 alarm occurred.
Sys Fan 10 Alarm FAN#10 alarm occurred.
Sys Fan 11 Alarm FAN#11 alarm occurred.
Sys Fan 12 Alarm FAN#12 alarm occurred.
Sys Fan 13 Alarm FAN#13 alarm occurred.
Sys Fan 14 Alarm FAN#14 alarm occurred.
Sys Fan 15 Alarm FAN#15 alarm occurred.
Figure 188: BMC Messages (Lower Line)
On-screen message Description