User Guide
24
www.nec-computers.com
Connect device having a serial interface to this connector. Use COM B connector to communicate with
the remote console. A leased line cannot be connected directly to this connector.
14
Mouse/keyboard connectors
Connect the mouse and keyboard to the connectors through the provided relay cables.
15
LAN connectors
Connect network systems on the LAN to the connectors.
The number "1" following the bold-faced number indicates LAN port 1, and the number "2" indicates LAN
port 2.
16
Speed lamp (amber)
This lamp indicates the transmission speed of the LAN.
17
LINK/ACT lamp (green)
This lamp indicates the access status of the LAN.
18
Management LAN Port
100BASE-TX/10BASE-T interface port used to manage the server via the LAN.
To Next Page
Loading...