User Guide
299
www.nec-computers.com
8. Specify the installation medium and the Windows system partition.
The [Setting medium / Partitions] step is displayed. Confirm the parameters,
modify if necessary, and click [Next].
Caution
About the partition size
■ Specify a partition size larger than the required minimum
size for the OS installation.
■ Do not specify partition size larger than the capacity of the
connected hard disk drive.
- If you select "Create a new partition" at "Windows system
drive settings", the contents of the hard disk will be all
deleted.
- If "Use existing partitions" is selected, NEC ExpressBuilder
installs the Operating System to the 1st partition (the 1st par-
tition contents are deleted). The data in the other partition is
kept if the system has two or more partitions. (See the figure
below.)
■ You can not re-install the system with an existing partition
that is upgraded to Dynamic Disk. Do not select "Use exist-
ing partitions" at "Windows system drive settings".
First partition
deleted
Second partition
retained
Third partition
retained
To Next Page
Loading...