User Guide
46
www.nec-computers.com
5. Push the right and left release levers (blue) forward or rearward to unlock, and
slowly pull out the server from the rack.
Figure 21: Pushing the Release Levers
Caution
Do not apply any load on the server when it is pulled out from
the rack. Personal injuries may occur if the server falls.
6. Firmly hold the server, and take it out from the rack.
Caution
■ Pull out the server slowly holding the bottom of the server by
at least two persons.
■ Do not catch your fingers in the levers or rails.
7. To remove the rail assembly, pull out the rail toward you while pressing on the
lever.
Figure 22: Pressing the Lever
A: Release lever
A
To Next Page
Loading...