User Guide
79
www.nec-computers.com
BMC LAN Configuration Submenu
Caution
Notes on performing Clear BMC Configuration
■ Executing "Load Setup Defaults" in BIOS SETUP utility does
not restore the default value for settings related to manage-
ment LAN of BMC. To restore the default value, you need to
execute Clear BMC Configuration.
Table 18: BMC LAN Configuration Submenu
Feature Choices or
Display Only
Description Your Setting
IP Address 192.168.001.001 Specifies an IP address for the
management LAN.
Subnet Mask 255.255.255.000 Specifies a subnet mask for
management LAN.
Default Gateway 000.000.000.000 Specifies a default gateway for
the mangement LAN.
DHCP Disabled
Enabled
Set it to Enabled to obtain an
IP address from the DHCP
server automatically.
To specify an IP address
manually, set it to Disabled.
Web interface - -
HTTP Disabled
Enabled
Set it to Enabled to use HTTP
communication for the Web
interface.
HTTP Port Number 80 Specifies the TCP port number
which the management LAN
uses for HTTP communication.
HTTPS Disabled
Enabled
Set to [Enabled] to use HTTPS
communication for Web
interface.
HTTPS Port
Number
443 Specifies the TCP port number
which the management LAN
uses for HTTPS
communication.
Command Line
Interface
--
Telnet Disabled
Enabled
Set to [Enabled] to use Telnet
communication as a command
line interface.
Telnet Port Number 23 Specifies the TCP port number
to be used for Telnet
communication.
SSH Disabled
Enabled
Set to [Enabled] to use SSH
communication as a command
line interface.
SSH Port Number 22 Specifies the TCP port number
to be used for SSH
communication.
Clear BMC
Configuration
Press Enter and select "Yes" to
initialize the BMC configuration.
To Next Page
Loading...