NEC SL1100 - Using Wizards; Figure 5-2 Wizard Programming

5 - 4 Wizards View
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
SECTION 5USING WIZARDS
When you select a feature from the Wizard list the associated screen is displayed,
allowing you to program the feature. If there is more than one screen that is
programmed for the feature, you can use the Next and Back navigational buttons to
switch between screens or you can use the View page in wizard pulldown menu.
Figure 5-2 Wizard Programming
Wizard Name View Page in Wizard Program Navigational
Buttons
Operational
Buttons
1) Select a
Wizard.
2) Program
system data.
3) Change the Wizard page by selecting the page from the
pulldown menu or pressing either the Next or Back
navigational buttons.