NEC SL1100 - Creating a New Account; Figure D-1 Connect Dialogcreating;Deleting Connection Account

D - 2
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
2.1 Creating a New Account
To create an account using Connect dialog:
1. Select a Connection Type and specify settings relevant to the
Connection Type.
2. Specify the Login User Name and Password used to allow the
connection.
3. Press the Save or Save As button located in the Connection Account
section of the dialog.
4. When the Save As dialog is displayed, enter a description of the
connection (refer to Figure D-2 Save As Connection Account Dialog on
page D-3.)
Figure D-1 Connect DialogCreating/Deleting Connection Account
Click Save or Save As to
create a Connection
Account.
Select the
Connection Type.
Specify the Login User
Name and Password.
Select a Connection
Account from the pulldown
menu and click Delete a
Connection Account.