NEC SL1100 - Figure B-3 Multiassign in System;Numbering;Stations Screen

NEC SL1100 Issue 3.01
PC Programming Manual B - 5
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 5OVERVIEW FILL (MULTIASSIGN-STANDARD TAB)
 This feature is available on PCPro version 4.0 and higher.
1. Each of the sections below has a “MultiAssign” icon added to the individual
screen.
System/Numbering/Stations
System/Numbering/Virtual Extensions
System/Numbering/Department Groups
Stations/Config/InMail
2. Below is an example of the MultiAssign icon in System/Numbering/Stations.
Figure B-3 MultiAssign in System/Numbering/Stations Screen
MultiAssign icon