NEC SL1100 - Figure F-3 Webpro Login Screen

F - 4
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.01 NEC SL1100
SECTION 3FEATURE ACTIVATION USING WEBPRO
WebPro can also be used to manually activate features.
3.1 Manually Activating a Feature
To activate a feature using WebPro, you must have Internet connection.
1. Point your browser at the IP address of the CPU-B1 (set in PRG
10-12-01).
2. When the Home page is displayed, enter the User Name and
Password.
The default User Name = sltech and Password = 12345678.
3. If login was successful, the WebPro Home page is displayed. Click
Feature Activation.
Figure F-3 WebPro Login Screen