NEC SL1100 - System Initialization; Accessing System Initialization; 2 Nd Initialization; Figure A-18 System Initialization Dialog

NEC SL1100 Issue 3.01
PC Programming Manual A - 19
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 7SYSTEM INITIALIZATION
A System Initialization resets a system. During an initialization all telephone calls are
dropped and all connections to WebPro, PCPro and the handset are lost. Therefore,
it is important that initialization should be executed at a suitable time when the system
is not actively in use. PCPro can only execute an initialization when it is connected to
a system.
7.1 Accessing System Initialization
When PCPro is connected to a system, access the System Initialization dialog
by selecting the menu item Communications > System Initialization.
7.2 2
nd
Initialization
A 2
nd
Initialization resets the chassis and retains all previously modified values
within system data.
Figure A-18 System Initialization Dialog