PC Programming Manual 2 - 1
___________________________________________________________________________________
Chapter 2 Installation
SECTION 1SYSTEM REQUIREMENTS
The process of installing PCPro is straight-forward. Just run the installation program
and follow the instructions. Table 2-1 System Requirements lists the minimum system
requirements necessary for install PCPro on your computer.
Table 2-1 System Requirements
CPU
Pentium
®
III 598 MHz (minimum)
Pentium 4 2.5 GHz (recommended)
Memory
128 MB of RAM
256 MB (recommended)
OS
Windows XP, Vista, Windows 7 (32/64-bit)
Other
Microsoft Internet Explorer 8.0 or higher
Communication port
LAN, RS232 or Modem
Disk Space
25MB for PCPro (minimum)
TCP Port
PCPro must have TCP port
8000 open between the chassis and
the host PC. Communications between PCPro and the chassis
occurs on this port when uploading-downloading via LAN.
The PCPro TCP port is 8000 at default, but this can be changed
through the Administration>WebPro Settings section of WebPro,
or using PRG 90-54-02 in Web Pro, PCPro or Phone
Programming.
TCP port 5963 is required to be open if the Debug Terminal is
going to be used.
To Next Page
Loading...
